Zum Hauptinhalt wechseln

Supersonic SC-777BT Camera Replacement

Was du brauchst

  1. Supersonic SC-777BT Camera Replacement, Camera: Schritt 1, Bild 1 von 3 Supersonic SC-777BT Camera Replacement, Camera: Schritt 1, Bild 2 von 3 Supersonic SC-777BT Camera Replacement, Camera: Schritt 1, Bild 3 von 3
    • Remove the back cover using the plastic opening tool.

    • Open the cover like a book so you do not disconnect the yellow plastic holding the cover to the motherboard.

  2. Supersonic SC-777BT Camera Replacement: Schritt 2, Bild 1 von 3 Supersonic SC-777BT Camera Replacement: Schritt 2, Bild 2 von 3 Supersonic SC-777BT Camera Replacement: Schritt 2, Bild 3 von 3
    • Remove the two screws using the screwdriver.

    • Use the tweezers to pull the camera out of place.

    • Be gentle while pulling it out so you do not pull any extra components out.

  3. Supersonic SC-777BT Camera Replacement: Schritt 3, Bild 1 von 1
    • Disconnect the yellow ribbon cable from the connector.

  4. Supersonic SC-777BT Camera Replacement: Schritt 4, Bild 1 von 2 Supersonic SC-777BT Camera Replacement: Schritt 4, Bild 2 von 2
    • Remove camera.

    • It should just peel off like a sticker.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Maiya Webster

Mitglied seit: 09/18/18

364 Reputation

2 Anleitungen geschrieben

Team

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 128