Teenage Engineering OP-1 Connector Board Disconnection

Einleitung

Use this guide to disconnect the Connector Board of the OP-1.

Open the back panel by using a Jimmy on the side of the panel. Be careful not to damage the OP-1 coating.
Lift the back panel and remove it. The Connector Board is revealed.
Disconnect the flex connector by lifting it up with a spudger.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Mitglied seit: 10/23/13

1.077 Reputation

2 Anleitungen geschrieben

Community

3 Mitglieder

7 Anleitungen geschrieben