Zum Hauptinhalt wechseln

The Beatles Rock Band Drum Set Drum Pad Replacement

Was du brauchst

  1. The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: Schritt 1, Bild 1 von 2 The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: Schritt 1, Bild 2 von 2
    • Pry the drum pad off of the drum set.

    • This will take significant force, but the rubber on the drum pad can withstand the force.

  2. The Beatles Rock Band Drum Set Drum Pad Replacement: Schritt 2, Bild 1 von 2 The Beatles Rock Band Drum Set Drum Pad Replacement: Schritt 2, Bild 2 von 2
    • Remove the small wire clip shown in the picture.

    • If this wire is already disconnected, that is most likely the cause for the drum pad not working.

  3. The Beatles Rock Band Drum Set Drum Pad Replacement: Schritt 3, Bild 1 von 1
    • Remove the four Phillips size J0 screws supporting the hit sensor.

    • There is a small plastic disk and a spring in the support; be sure not to lose it.

  4. The Beatles Rock Band Drum Set Drum Pad Replacement: Schritt 4, Bild 1 von 1
    • The sensor can be peeled off of the drum pad.

Abschluss

To reassemble your device, follow these instructions in reverse order.

2 weitere Nutzer:innen haben diese Anleitung absolviert.

Zach Richter

Mitglied seit: 01/24/17

549 Reputation

5 Anleitungen geschrieben

Team

Cal Poly, Team 13-3, Banghart Winter 2017 Mitglied von Cal Poly, Team 13-3, Banghart Winter 2017

CPSU-BANGHART-W17S13G3

4 Mitglieder

5 Anleitungen geschrieben

Ein Kommentar

Where can you buy replacement sensor?

Barry Howard - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 5

Letzte 7 Tage: 14

Letzte 30 Tage: 67

Insgesamt: 7,915