Einleitung

Unfortunately, my iFixit kit has not yet arrived, so I had to use my Wiha drivers and generic spudger. This is pretty simple to do!

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the nine Phillips screws using a Philips 00 screwdriver
    • Remove the nine Phillips screws using a Philips 00 screwdriver

  2. Pry up the case carefully using a spudger.
    • Pry up the case carefully using a spudger.

    • Make sure to not push the spudger in too far, as this could result in internal damage

    • Lift off the cover, and you're done!

Abschluss

To reassemble, place the bottom cover on and push until you hear a satisfying click. Keep doing this until the whole cover is secured. Then, screw all of the screws back in!

2 weitere Nutzer haben diese Anleitung absolviert.

Tanner Lange

Mitglied seit 18.03.2018

909 Reputation

3 Anleitungen geschrieben

Team

Francophones Mitglied von Francophones

Community

9 Mitglieder

10 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 4

Letzte 7 Tage: 15

Letzte 30 Tage: 34

Insgesamt: 310