Einleitung

The battery acts as an internal power source for the device. In case this battery needs to be replaced, this simple guide will walk you through the steps of removing the current battery to replace it.

Ersatzteile

Kein Ersatzteil erforderlich.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Kommentar hinzufügen

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Kommentar hinzufügen

Lift the cover up and off the device.
  • Lift the cover up and off the device.

Kommentar hinzufügen

Locate the battery on the motherboard.
  • Locate the battery on the motherboard.

Kommentar hinzufügen

Using the spudger, wedge the metal clip off of the top surface of the battery.
  • Using the spudger, wedge the metal clip off of the top surface of the battery.

Kommentar hinzufügen

Use your finger to push the battery sideways out of its holder.
  • Use your finger to push the battery sideways out of its holder.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Cody Hunter

Mitglied seit 10.10.2011

22 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 5-33, Amido Fall 2011 Mitglied von Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 7

Insgesamt: 1,327