Einleitung

The power supply allows for the TiVo components to work. In the situation that it needs to be replaced, this guide will walk you through the installation of the power supply

Ersatzteile

Kein Ersatzteil erforderlich.

Unscrew the five 0.31 inch T-9 screws on the back cover.
  • Unscrew the five 0.31 inch T-9 screws on the back cover.

Kommentar hinzufügen

Slide the cover towards the back until it is no longer under the front cover.
  • Slide the cover towards the back until it is no longer under the front cover.

Kommentar hinzufügen

  • Lift the cover up and off the device.

Kommentar hinzufügen

  • Locate the power supply.

Kommentar hinzufügen

  • Remove the belt connecting the power supply to the motherboard by pulling it out.

Kommentar hinzufügen

  • Remove the red, yellow, and black cable connecting the power supply to the hard drive.

Kommentar hinzufügen

  • Remove the two 0.31 inch T-9 screws from the power supply.

Kommentar hinzufügen

  • Pinch the plastic plugs and lift the power supply up to detach from plugs.

  • All 4 plugs must be detached to remove power supply.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Phil Jones

Mitglied seit 11.10.2011

41 Reputation

1 Anleitung geschrieben

Team

Cal Poly, Team 5-33, Amido Fall 2011 Mitglied von Cal Poly, Team 5-33, Amido Fall 2011

CPSU-AMIDO-F11S5G33

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,046