Einleitung
The Tineco FLOOR ONE S3 Breeze (model no. FW007600US) will sometimes have problems with the brush roller wearing out over time, and it may need to be replaced by removing the brush roller cover and removing the existing brush roller. After a quick reassembly the machine is ready to operate. This replacement guide contains the following steps for the brush roller replacement.
-
-
Place a finger on the lever located on the brush roller cover.
-
Firmly push the lever with a finger to remove the brush roller cover.
-
-
-
-
Grasp the brush roller on its side.
-
Pull the brush roller out of its initial position.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Eine weitere Person hat diese Anleitung absolviert.
Team
University of Memphis, Team 3-5, Sneed Spring 2024 Mitglied von University of Memphis, Team 3-5, Sneed Spring 2024
UM-SNEED-S24S3G5
4 Mitglieder
6 Anleitungen geschrieben
