Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Einleitung

I want to show you how to disassembly the body of Toolcraft ST-50D solder station.

Ersatzteile

Keine Ersatzteile angegeben.

  1. I think you can disassembly  other models of Toolcraft ST solder stations 50/80/100 analog or digital  the same way.
    • I think you can disassembly other models of Toolcraft ST solder stations 50/80/100 analog or digital the same way.

  2. There are two holes with screws on the bottom side (green circles on the picture) and the 2-nd pair of screws is under the two rubbery "legs" (red circles).
    • There are two holes with screws on the bottom side (green circles on the picture) and the 2-nd pair of screws is under the two rubbery "legs" (red circles).

  3. Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen

    Das Essential Toolkit

    Die nützlichsten Werkzeuge in unserem kompaktesten Kit.

    Jetzt kaufen
  4. ... by nails or by flat screwdriver and you will see the second pair of holes with screws.
    • ... by nails or by flat screwdriver and you will see the second pair of holes with screws.

  5. ... by Phillips #1 screwdriver and you can open the body of the  solder station.
    • ... by Phillips #1 screwdriver and you can open the body of the solder station.

  6. The cables connected to switch:  ON is Up , from inside: 1) RED  + BLUE                                                              2) BROWN
    • The cables connected to switch: ON is Up , from inside: 1) RED + BLUE 2) BROWN

  7. From inside.
    • From inside.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Martin Kubica

Mitglied seit: 13.05.2016

754 Reputation

1 Anleitung geschrieben

Hi! Unfortunately, I have stupidly pulled off the contact sockets of the switch when disassembling my station. But I did not notice how they were originally connected. Could you please take a look and maybe take a picture of how the contacts are connected to the switch? I thank you in advance.

omanoman - Antwort

Hi.

So I added a picture of cables connected to the switch. ON position of the switch is Up, the cables are from inside of the solder station.

Martin Kubica

Martin Kubica - Antwort

Hello Martin, really appreciate your guide but do you have a photo of the back of the board with all the connections? I took it apart but did not take note of which connector the White, Blue and Red/Black wires went to. Its not clear on the photos above, would be hugely appreciated. Thanks!

Michael Telatynski - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 5

Letzten 30 Tage: 30

Insgesamt: 645