Einleitung

Removing the back may be the easiest thing to do, however do not forget about the screws hidden under the rubber foot pads!

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Remove the 2 rubber foot pads from the bottom with the small Plastic Opening tool.
    • Remove the 2 rubber foot pads from the bottom with the small Plastic Opening tool.

  2. Remove the 10 7.1 mm screws using Phillips #1 screwdriver.
    • Remove the 10 7.1 mm screws using Phillips #1 screwdriver.

    • Loosen the back cover by using a plastic opening tool all the way around the device.

      • There are areas all along the sides of the device that help aid in this.

    • Remove the back cover by gently lifting up on one side of the device.

      • The easiest side to lift up on is the one with the removed rubber foot pads.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Jillian Thomas

Mitglied seit 14.10.2017

165 Reputation

4 Anleitungen geschrieben

Team

USF Tampa, Team S1-G121, Cagle Fall 2017 Mitglied von USF Tampa, Team S1-G121, Cagle Fall 2017

USFT-CAGLE-F17S1G121

3 Mitglieder

6 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 78