Zum Hauptinhalt wechseln

Einleitung

This guide serves as a prerequisite step for all of the other repair guides. Removing the back panel is necessary to access any of the hardware within the tablet.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the SD card from the SD card slot.
    • Remove the SD card from the SD card slot.

  2. Use the opening tool to separate the front and rear panels by slipping the tool underneath the screen edge and sliding it around the entire device. Make sure you unclip all of the clips on the back panel, or pulling it off will be difficult and may damage the tablet. Make sure you unclip all of the clips on the back panel, or pulling it off will be difficult and may damage the tablet.
    • Use the opening tool to separate the front and rear panels by slipping the tool underneath the screen edge and sliding it around the entire device.

    • Make sure you unclip all of the clips on the back panel, or pulling it off will be difficult and may damage the tablet.

  3. Remove the speaker cable from its socket by gripping both sides of the white connector piece with tweezers and pulling straight out. Be careful not to rip the wires out of the white connector piece. Be careful not to rip the wires out of the white connector piece.
    • Remove the speaker cable from its socket by gripping both sides of the white connector piece with tweezers and pulling straight out.

    • Be careful not to rip the wires out of the white connector piece.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Andrew Gillis

Mitglied seit: 09.10.2014

546 Reputation

3 Anleitungen geschrieben

Team

Cal Poly, Team 14-26, Maness Fall 2014 Mitglied von Cal Poly, Team 14-26, Maness Fall 2014

CPSU-MANESS-F14S14G26

4 Mitglieder

12 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 0

Letzten 7 Tage: 0

Letzten 30 Tage: 0

Insgesamt: 77