Einleitung

A working power button makes the difference between a working laptop and a brick. If your laptop refuses to turn on or doesn't respond to power button presses; replacing the power button circuit board may fix it.

Ersatzteile

Kein Ersatzteil erforderlich.

The battery is located on the front right corner of the laptop.
  • The battery is located on the front right corner of the laptop.

Kommentar hinzufügen

With one finger on the raised grip, slide the latch towards the front of the laptop.
  • With one finger on the raised grip, slide the latch towards the front of the laptop.

Kommentar hinzufügen

Pull the battery out towards the side. Pull the battery out towards the side.
  • Pull the battery out towards the side.

Kommentar hinzufügen

Lift the battery straight up, out of the computer. Lift the battery straight up, out of the computer.
  • Lift the battery straight up, out of the computer.

Kommentar hinzufügen

Using a set of case opening tools, pry open the left and right sides of the black plastic strip above the keyboard. Fully detach the strip. Fully detach the strip.
  • Using a set of case opening tools, pry open the left and right sides of the black plastic strip above the keyboard.

  • Fully detach the strip.

These last two pictures seem to show the same thing.

Dan Brown - Antwort

Unscrew the two screws near the top of the keyboard. Unscrew the two screws near the top of the keyboard.
  • Unscrew the two screws near the top of the keyboard.

Make sure to include screw lengths to the nearest mm.

Dan Brown - Antwort

Lift the keyboard by holding the middle top of the keyboard. The keyboard is still connected by a ribbon cable to the motherboard.
  • Lift the keyboard by holding the middle top of the keyboard.

  • The keyboard is still connected by a ribbon cable to the motherboard.

Kommentar hinzufügen

Carefully pull upwards on the ribbon cable to detach. Remove keyboard. Remove keyboard.
  • Carefully pull upwards on the ribbon cable to detach.

  • Remove keyboard.

Kommentar hinzufügen

Unscrew the screws on either side of the power button circuit board. Unscrew the screws on either side of the power button circuit board.
  • Unscrew the screws on either side of the power button circuit board.

Kommentar hinzufügen

Pull upward on the small white ribbon cable to detach from circuit board. Pull upward on the small white ribbon cable to detach from circuit board.
  • Pull upward on the small white ribbon cable to detach from circuit board.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kiril Lange

Mitglied seit 22.09.2014

901 Reputation

9 Anleitungen geschrieben

Team

USF Tampa, Team 3-2, Brown Fall 2014 Mitglied von USF Tampa, Team 3-2, Brown Fall 2014

USFT-BROWN-F14S3G2

3 Mitglieder

9 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 14

Insgesamt: 508