Einleitung

If your keys are not typing anything or the way they should, then check this guide to see how to safely remove and replace the keyboard input device on the computer. It will also contain detailed pictures on what to expect and watch out for, such as ribbons or wires.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Make sure your computer is turned off and the computer is not plugged in.
    • Make sure your computer is turned off and the computer is not plugged in.

    • Turn your laptop upside down, and slide the right release tab outward.

    • Using you left hand, hold the left release tab towards the left side and then pull the battery out.

    Kommentar hinzufügen

  2. Remove the lower half of the laptop and lay upper half on its top.
    • Remove the lower half of the laptop and lay upper half on its top.

    Kommentar hinzufügen

    • Using the Phillips screwdriver remove the two 4.0mm screws holding each of the speakers housings to the case.

    • Remove the speakers from the case being careful of the wires.

    Kommentar hinzufügen

  3. Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    Frohes Fest, frohes Tüfteln
    Pack's ein, pack's aus, pack's an: Erhalte 12 € Rabatt auf deinen Einkauf ab 50 € mit dem Code FIXMAS12
    • The wires for the speakers are color coded.The red and black wires are for the right speaker, and the black and white wires are for the left speaker.

    Kommentar hinzufügen

    • Flip the laptop over so it is rightside up, and open the laptop all the way so that the screen is horizontal.

    Kommentar hinzufügen

    • Using the plastic opening tool, pry off the panel above the keyboard, starting near the right front speaker.

    • Use the plastic opening tool to pop off tabs along the length of this panel.

    • This may feel like you're about to break something, but as long as you work your way down the panel and don't yank it out, the laptop will be fine.

    Kommentar hinzufügen

    • Unscrew the two 4.5 mm screws holding the keyboard on with the Phillips #1 screwdriver.

    Kommentar hinzufügen

    • Lift the keyboard gently from the side closest the screen.

    • Pull out the ribbon connecting the keyboard to the laptop.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

pfedigan

Mitglied seit 12.04.2013

11 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 2-23, Maness Spring 2013 Mitglied von Cal Poly, Team 2-23, Maness Spring 2013

CPSU-MANESS-S13S2G23

4 Mitglieder

5 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 6

Insgesamt: 1,144