Einleitung

The purpose of this guide is to provide step-by-step instructions for replacing your hard drive. For this process you will need a Phillips #00 screwdriver.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Locate the hard drive cover on the bottom, left-hand corner of your laptop.
    • Locate the hard drive cover on the bottom, left-hand corner of your laptop.

    • Using a Phillips #00 screwdriver, remove both 4mm screws.

    Kommentar hinzufügen

  2. Lift the cover to reveal the old hard drive.
    • Lift the cover to reveal the old hard drive.

    • Carefully detach the hard drive from the SATA/Power connector.

    Kommentar hinzufügen

    • After removing the old hard drive, place the new hard drive into the bay, and firmly reattach it to the SATA/Power connector.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Daniel Johnson

Mitglied seit 07.04.2013

102 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 17-6, Regan Spring 2013 Mitglied von Cal Poly, Team 17-6, Regan Spring 2013

CPSU-REGAN-S13S17G6

5 Mitglieder

11 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 15

Insgesamt: 1,491