Einleitung

The speaker cover, located above the keyboard, can be removed by following these simple steps.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Locate the two sliding locks indicated in the photo.
    • Locate the two sliding locks indicated in the photo.

    • Slide the right lock (labeled "1") to the right. It will remain in the unlocked position.

    • Slide the left lock (labeled "2") to the left and hold it in place.

    Kommentar hinzufügen

  2. While holding the left lock, place your finger in the indentation next to the battery and lift the battery out.
    • While holding the left lock, place your finger in the indentation next to the battery and lift the battery out.

    Kommentar hinzufügen

    • Remove the four screws indicated in the photos using a Phillips 00 Screwdriver. Left to right: 6mm button-head, 3mm flat-head, 6mm button-head, 6mm button-head.

    Kommentar hinzufügen

    • With your hands, grasp the speaker cover on the edge nearest to the screen.

    • Pry the speaker cover upward.

    Kommentar hinzufügen

    • Remove the speaker cover. Your laptop will look like this photo when the speaker cover has been removed.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Daniel Johnson

Mitglied seit 07.04.2013

102 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 17-6, Regan Spring 2013 Mitglied von Cal Poly, Team 17-6, Regan Spring 2013

CPSU-REGAN-S13S17G6

5 Mitglieder

11 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 5

Insgesamt: 1,007