Repariere deine Sachen Community Store

Toshiba Satellite C50D-A Fan Replacement

Einleitung

Here, using a Phillips screwdriver, and a plastic opening tool, you will learn how to clean the fan in your computer.

Was du brauchst

  1. Toshiba Satellite C50D-A Fan Replacement, Battery: Schritt 1, Bild 1 von 1

    • Click button 1 to the unlocked position.

    • This button will have a 1 by it.

    Bearbeiten

  2. Toshiba Satellite C50D-A Fan Replacement: Schritt 2, Bild 1 von 2 Toshiba Satellite C50D-A Fan Replacement: Schritt 2, Bild 2 von 2

    • Push and hold button 2 to the left.

    • As you push button 2 to the left position, simultaneously lift up the battery pack.

    • This button will have a 2 by it.

    Bearbeiten

  3. Toshiba Satellite C50D-A Fan Replacement, Lower Case: Schritt 3, Bild 1 von 2 Toshiba Satellite C50D-A Fan Replacement, Lower Case: Schritt 3, Bild 2 von 2

    • Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.

    Bearbeiten

  5. Toshiba Satellite C50D-A Fan Replacement: Schritt 4, Bild 1 von 1

    • Remove the one 2.5mm Phillips #1 middle plate screw.

    Bearbeiten

  6. Toshiba Satellite C50D-A Fan Replacement: Schritt 5, Bild 1 von 1

    • Lift up the middle vent panel.

    • Set the panel to the side.

    Bearbeiten

  7. Toshiba Satellite C50D-A Fan Replacement: Schritt 6, Bild 1 von 3 Toshiba Satellite C50D-A Fan Replacement: Schritt 6, Bild 2 von 3 Toshiba Satellite C50D-A Fan Replacement: Schritt 6, Bild 3 von 3

    • Using the plastic opening tool, remove the outer panel and set to the side.

    • Be careful not to break the back of the computer.

    Bearbeiten

  8. Toshiba Satellite C50D-A Fan Replacement, Fan: Schritt 7, Bild 1 von 3 Toshiba Satellite C50D-A Fan Replacement, Fan: Schritt 7, Bild 2 von 3 Toshiba Satellite C50D-A Fan Replacement, Fan: Schritt 7, Bild 3 von 3

    • Using a Phillips #1 screwdriver, remove the one 1.5mm screw.

    Bearbeiten

  9. Toshiba Satellite C50D-A Fan Replacement: Schritt 8, Bild 1 von 1

    • Lift the fan up and blow compressed air or replace with a new one.

    • Blow compressed air into the spirals in the middle of the fan.

    Bearbeiten
Abschluss

To reassemble your device, follow these instructions in reverse order.

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 5

Insgesamt: 1,177