Einleitung

This guide details how to replace the optical drive in your laptop. You will need a pry tool and Phillips screwdriver to complete the prerequisite steps (removing the back of the device) to access the optical drive, remove it, and replace it with a new one.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Click button 1 to the unlocked position.
    • Click button 1 to the unlocked position.

    • This button will have a 1 by it.

    Kommentar hinzufügen

  2. Push and hold button 2 to the left.
    • Push and hold button 2 to the left.

    • As you push button 2 to the left position, simultaneously lift up the battery pack.

    • This button will have a 2 by it.

    Kommentar hinzufügen

    • Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.

    Kommentar hinzufügen

    • Remove the one 2.5mm Phillips #1 middle plate screw.

    Kommentar hinzufügen

    • Lift up the middle vent panel.

    • Set the panel to the side.

    Kommentar hinzufügen

    • Using the plastic opening tool, remove the outer panel and set to the side.

    • Be careful not to break the back of the computer.

    Kommentar hinzufügen

    • Locate the opticaldrive and find where it is slotted into the motherboard.

    • Be careful not to break the attachment site.

    Kommentar hinzufügen

    • Gently lift up the optical drive at a slight angle, and pull it towards you to remove it.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Amber van Solingen

Mitglied seit 29.01.2018

630 Reputation

6 Anleitungen geschrieben

Team

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 2

Letzte 7 Tage: 4

Letzte 30 Tage: 7

Insgesamt: 58