Einleitung

If you ever find yourself wishing you had more capacity in your laptop's hard drive, replacing your old one with a larger one might be the option for you. This guide will show you how to replace the old hard drive in a Toshiba Satellite with a new one.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Press down with your fingers while also applying a sliding motion on the latch buttons near the battery on the underside of your laptop.
    • Press down with your fingers while also applying a sliding motion on the latch buttons near the battery on the underside of your laptop.

    Kommentar hinzufügen

  2. Lift the battery upward with your fingers out of the battery compartment.
    • Lift the battery upward with your fingers out of the battery compartment.

    Kommentar hinzufügen

    • Place the laptop with the bottom facing up.

    • Observe the single 6mm Phillips #1 screw keeping the laptop panels in place.

    Kommentar hinzufügen

    • Using the Phillips #1 screwdriver, remove the 6mm screw on the panel, exposing the hard drive.

    Kommentar hinzufügen

    • Using the Phillips #1 screwdriver, remove the 8mm screw that is holding the hard drive in place.

    Kommentar hinzufügen

    • Use your finger to lift the hard drive up.

    • Pull out the hard drive to the right.

    Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Walker Tortorigi

Mitglied seit 29.01.2018

468 Reputation

4 Anleitungen geschrieben

Team

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 9

Insgesamt: 88