Einleitung
This guide will help you if you need to replace the fan in your laptop. Replacing the fan will fix any issues caused by a old or faulty fan. It is very straightforward and can be completed regardless of technical knowledge or skill level.
Was du brauchst
-
-
With the Laptop off, turn it over.
-
The battery is located next to the screen hinges.
-
Move the locking tab located directly above the battery on the right side, all the way to the left. It will stay in place by itself.
-
-
-
Slide the tab identical to the first one on the right side above the battery pack to the right. This tab is spring loaded, so be sure to hold it.
-
Insert your tool or your fingernail into the notch just above the center of the battery pack, and lift the battery pack out of the device.
-
-
-
Unscrew the screw on the back panel of the laptop covering the hard drive.
-
-
-
-
Using the PH1 screwdriver, remove the remaining screws from the back casing of the laptop.
-
-
-
Use a nylon spudger or plastic opening tool to carefully wedge the casing apart and remove the back plate of the laptop.
-
-
-
Detach the multi-colored wire connecting the fan to the motherboard and pull the fan out.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Appalachian State University, Team S2-G1, Menagarishvili Fall 2018 Mitglied von Appalachian State University, Team S2-G1, Menagarishvili Fall 2018
APSU-MENAGARISHVILI-F18S2G1
3 Mitglieder
15 Anleitungen geschrieben
