Ersatzteile

Kein Ersatzteil erforderlich.

  1. Push the left tab with your left hand. Then push the right tab with your right hand. While your right hand is still pushing, remove the battery with your left hand.
    • Push the left tab with your left hand.

    • Then push the right tab with your right hand.

    • While your right hand is still pushing, remove the battery with your left hand.

  2. Remove this screw with a JIS #000 screwdriver. This screw does not come out all the way.
    • Remove this screw with a JIS #000 screwdriver.

    • This screw does not come out all the way.

  3. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um

    Erfolgreich repariert? Genial!

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

    Wir sind alle Genies

    Teile ein Foto deiner Reparatur mit dem Hashtag #ImAGenius

  4. Remove the panel with the plastic opening tool. Make sure you lift it on all four sides.
    • Remove the panel with the plastic opening tool. Make sure you lift it on all four sides.

  5. Using the JIS #000 screwdriver, remove the .5mm screw. Using the JIS #000 screwdriver, remove the .5mm screw.
    • Using the JIS #000 screwdriver, remove the .5mm screw.

  6. Use the plastic opening tool to remove the keyboard from the laptop. Use the plastic opening tool to remove the keyboard from the laptop.
    • Use the plastic opening tool to remove the keyboard from the laptop.

  7. Once keyboard is popped out, use a nylon spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop. Once keyboard is popped out, use a nylon spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.
    • Once keyboard is popped out, use a nylon spudger to undo the ribbon or flap that attaches the back of the keyboard to the inside base of the laptop.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Kari Rodgers

Mitglied seit: 08.02.2018

410 Reputation

4 Anleitungen geschrieben

Team

Sam Houston State, Team S16-G1, Nardone Spring 2018 Mitglied von Sam Houston State, Team S16-G1, Nardone Spring 2018

SHSU-NARDONE-S18S16G1

5 Mitglieder

5 Anleitungen geschrieben

Step has the incorrect screw to release the keyboard. There is no need to open the back panel. The screw which holds down the keyboard is the long screw between the Serial Number sticker and the battery release switch #2.

Anthony Francisco - Antwort

Statistik anzeigen:

Letzte 24 Stunden: 3

Letzte 7 Tage: 9

Letzte 30 Tage: 39

Insgesamt: 222