Zum Hauptinhalt wechseln

Einleitung

CMOS / BIOS Battery replacement for Toshiba Satellite C660 with video tutorial:

Einführungsvideo

  1. Disconnect the charger and the battery. Disconnect the charger and the battery.
    • Disconnect the charger and the battery.

  2. Remov the narrow plastic lid and unscrew 4x Phillips screw. Remov the narrow plastic lid and unscrew 4x Phillips screw. Remov the narrow plastic lid and unscrew 4x Phillips screw.
    • Remov the narrow plastic lid and unscrew 4x Phillips screw.

  3. Remove the keyboard. Remove the keyboard. Remove the keyboard.
    • Remove the keyboard.

  4. This is the internal CMOS / BIOS battery. Use small screwdriver to remove it. This is the internal CMOS / BIOS battery. Use small screwdriver to remove it. This is the internal CMOS / BIOS battery. Use small screwdriver to remove it.
    • This is the internal CMOS / BIOS battery. Use small screwdriver to remove it.

  5. And that's it!
    • And that's it!

    Sur mon satellite L555-135, ce n’est pas une CR32, mais une petite pile soudée. Est-elle compatible avec une CR32 ? Il n’y a aucune inscription sur la pile. Merci.

    Pat Bazar - Antwort

    Oui c'est compatible car les bios nécessitent 3 volts pour rester à jour. Vous pouvez très bien utiliser une pile de 3v plus petite mais elle se déchargera plus rapidement ou plus grosse (mais toujours en 3v) pour peut qu'elle rentre dans l'emplacement prévu par le constructeur.

    Les CR32 sont devenus des standards.

    Hyperion - Antwort

Abschluss

To reassemble your device, follow these instructions in reverse order.

12 weitere Nutzer haben diese Anleitung absolviert.

ZFix

Mitglied seit: 09.12.2013

179.593 Reputation

323 Anleitungen geschrieben

Team

Master Techs Mitglied von Master Techs

Community

300 Mitglieder

1.005 Anleitungen geschrieben

4 Kommentare

what battery do i need

allan mccauley - Antwort

This is a CR2032 battery

Hyperion - Antwort

The receptacle that the battery goes into is loose and not making contact on the (+) terminal. This is a shoddy design. You can test it by pressing the receptacle down and powering the laptop. Works fine. You cannot solder the terminal for fear of upsetting the motherboard. Any solutions.

Until I find one, I continue to press F1, go to Control Panel and set the time and date every time I power on the laptop.

Hari Razdan - Antwort

same battery CR2032 for Toshiba sattelite L775 G10 ?

thx

gagalot Eric - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzten 24 Stunden: 19

Letzten 7 Tage: 124

Letzten 30 Tage: 517

Insgesamt: 35,750