Einleitung

Use this guide when your keyboard does not work or if any keys falls off. You cannot replace individual keys.

Ersatzteile

Kein Ersatzteil erforderlich.

Slide both of the latches to the outside to release the battery. Slide both of the latches to the outside to release the battery.
  • Slide both of the latches to the outside to release the battery.

Kommentar hinzufügen

Pull the battery out by lifting the battery cover away from the laptop. Pull the battery out by lifting the battery cover away from the laptop.
  • Pull the battery out by lifting the battery cover away from the laptop.

Kommentar hinzufügen

Flip the computer over and insert the plastic opening tool under the plastic strip at the top of the keyboard. Pry the top plastic strip from the top of the keyboard. Peel the strip completely away from the keyboard.
  • Flip the computer over and insert the plastic opening tool under the plastic strip at the top of the keyboard.

  • Pry the top plastic strip from the top of the keyboard.

  • Peel the strip completely away from the keyboard.

Kommentar hinzufügen

Using your Phillips #00, unscrew the two 4.80mm screws at the top of the keyboard. Using your Phillips #00, unscrew the two 4.80mm screws at the top of the keyboard.
  • Using your Phillips #00, unscrew the two 4.80mm screws at the top of the keyboard.

Kommentar hinzufügen

When removing the keyboard, be careful not to rip the ribbon cable connecting the keyboard to the computer, to avoid damaging it. Flip the keyboard up from the bottom in order to see the two ribbons connecting it to the motherboard.
  • When removing the keyboard, be careful not to rip the ribbon cable connecting the keyboard to the computer, to avoid damaging it.

  • Flip the keyboard up from the bottom in order to see the two ribbons connecting it to the motherboard.

Kommentar hinzufügen

Using the plastic opening tools, pop out the ribbon cable from the rest of the computer.
  • Using the plastic opening tools, pop out the ribbon cable from the rest of the computer.

Kommentar hinzufügen

Using the plastic opening tools, pop out the second ribbon cable from the rest of the computer.
  • Using the plastic opening tools, pop out the second ribbon cable from the rest of the computer.

Kommentar hinzufügen

Completely remove the keyboard from the laptop by lifting up the part closest to the screen, and then gently pulling out the bottom half. Keep the keyboard safe by storing it on a flat, non-metallic surface until needed.
  • Completely remove the keyboard from the laptop by lifting up the part closest to the screen, and then gently pulling out the bottom half.

  • Keep the keyboard safe by storing it on a flat, non-metallic surface until needed.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ian Washburne

Mitglied seit 11.01.2013

45 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 17-21, Forte Winter 2013 Mitglied von Cal Poly, Team 17-21, Forte Winter 2013

CPSU-FORTE-W13S17G21

5 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 10

Insgesamt: 1,168