Zum Hauptinhalt wechseln

Einleitung

The fan is what keeps the laptop from overheating so that the laptop can keep running the programs and surfing the web without slowing down. If the laptop persists in being uncomfortably hot, even after air dusting the fan several times, then replacing the fan may be needed.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Remove the twelve 5 mm  Phillips #1   screws from the back panel.
    • Remove the twelve 5 mm Phillips #1 screws from the back panel.

  2. Pry the back panel open with the plastic spudger or fingernails.
    • Pry the back panel open with the plastic spudger or fingernails.

    • Pry it gently so that the back panel does not crack.

  3. Remove the two 5 mm screws using a Phillips #1 screwdriver. Remove the two 5 mm screws using a Phillips #1 screwdriver.
    • Remove the two 5 mm screws using a Phillips #1 screwdriver.

  4. Gently disconnect the fan cable from the device.
    • Gently disconnect the fan cable from the device.

  5. Move the wires away from the fan’s hook. Remove the fan from the device.
    • Move the wires away from the fan’s hook.

    • Remove the fan from the device.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein weiterer Nutzer hat diese Anleitung absolviert.

Jose Marques

Mitglied seit: 01.11.2018

388 Reputation

2 Anleitungen geschrieben

Team

UMass Dartmouth, Team S1-G4, Simcock Fall 2018 Mitglied von UMass Dartmouth, Team S1-G4, Simcock Fall 2018

UMASSD-SIMCOCK-F18S1G4

3 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzten 24 Stunden: 1

Letzten 7 Tage: 3

Letzten 30 Tage: 5

Insgesamt: 128