Einleitung

Use this guide to replace or upgrade RAM cards in your Toshiba Satellite L305-S5946. Replacing your RAM cards will allow you to work with more programs. Doing this requires only removal of the battery as a precursor.

  1. Turn the laptop upside-down.
    • Turn the laptop upside-down.

    • Position the laptop so that the display hinges are facing away from you.

  2. Slide the left battery bay latch to the left.
    • Slide the left battery bay latch to the left.

  3. Slide the right battery bay latch to the right and hold. While holding onto the latch, use a plastic opening tool to lift and remove the battery bay cover. Remove the battery.
    • Slide the right battery bay latch to the right and hold.

    • While holding onto the latch, use a plastic opening tool to lift and remove the battery bay cover.

    • Remove the battery.

  4. Kostenloser Versand für alle Bestellungen über 100,00 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  5. Use a Phillips #1 screwdriver to turn the screw on the RAM cover.
    • Use a Phillips #1 screwdriver to turn the screw on the RAM cover.

    • Turn the screw until you hear a click.

      • This is a captive panel screw and remains with the cover.

  6. Insert the plastic opening tool into the indent and lift to remove the RAM cover. This is a captive panel screw and remains with the cover.
    • Insert the plastic opening tool into the indent and lift to remove the RAM cover.

      • This is a captive panel screw and remains with the cover.

  7. Use your fingernails to push the white and silver retaining clips away from each side of the RAM card. The RAM card should pop up at an angle.
    • Use your fingernails to push the white and silver retaining clips away from each side of the RAM card.

      • The RAM card should pop up at an angle.

  8. Use your fingers to gently pull the RAM card away from the computer. Repeat step 9 to remove the other RAM card that may be installed.
    • Use your fingers to gently pull the RAM card away from the computer.

    • Repeat step 9 to remove the other RAM card that may be installed.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Michael Erberich

Mitglied seit: 17.04.2013

103 Reputation

9 Anleitungen geschrieben

Team

Cal Poly, Team 3-49, Amido Spring 2013 Mitglied von Cal Poly, Team 3-49, Amido Spring 2013

CPSU-AMIDO-S13S3G49

4 Mitglieder

10 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 4

Insgesamt: 463