Einleitung
If your keyboard needs a thorough cleaning or needs a replacement, this is the guide you’re looking for. This guide will show you how to safely remove your keyboard from the computer’s shell.
Was du brauchst
-
-
The plastic strip boxed in red is located above the keyboard of the computer.
-
-
-
There are three points of contact boxed in red needed to release located at the far left, the far right and the middle of the plastic strip.
-
Remove the plastic strip from one far end progressively towards the other end using a metal spludger.
-
-
-
-
Use the metal spludger to push the keyboard in the direction of the track pad and then lift the keyboard up.
-
-
-
There are two tab boxed in red is located at each side of the ZIF (zero insertion force) connector.
-
Use a metal spludger to push the tab upward in order to release the cable ribbon.
-
Carefully pull out the ribbon cable from the ZIF (zero insertion force) connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 3-6, Isaacson Fall 2016 Mitglied von UMass Dartmouth, Team 3-6, Isaacson Fall 2016
UMASSD-ISAACSON-F16S3G6
2 Mitglieder
10 Anleitungen geschrieben
