Einleitung

This guide will help you replace a faulty CD drive in your laptop. It will instruct you to remove the back cover of the laptop in order to access the CD drive. You must then unscrew the drive and replace it with the new drive

Make sure you turn the laptop off first.
  • Make sure you turn the laptop off first.

  • Close the laptop lid and flip it over so that Toshiba logo is facing down.

Kommentar hinzufügen

Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.
  • Remove the two 6.5 mm Phillips head screws indicated using a Phillips #00 screw driver.

Kommentar hinzufügen

  • Once the screws are removed, slide the battery pack out of the computer.

Kommentar hinzufügen

  • Remove all 6.5 mm Philips head screws on the back cover of the laptop with a Philips #00 screwdriver.

  • Use the plastic opening tool to remove the back cover from the laptop.

  • Be aware that static discharge can cause damage to sensitive electrical components within the computer. To avoid this you can wear an anti-static wrist strap.

Kommentar hinzufügen

  • Remove the 3 mm Philips head screw that connects the CD drive to motherboard with a Phillips #00 screwdriver.

Kommentar hinzufügen

  • Gently pull the CD drive out, disconnecting it from the motherboard connector marked in blue.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Garrett Garofalo

Mitglied seit 19.03.2018

257 Reputation

2 Anleitungen geschrieben

Team

UMass Dartmouth, Team S3-G3, Peak Spring 2018 Mitglied von UMass Dartmouth, Team S3-G3, Peak Spring 2018

UMASSD-PEAK-S18S3G3

3 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 2

Insgesamt: 47