Einleitung

Replacing the hard drive in your laptop is a beginner level repair, which can easily be executed.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside. Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside.
    • Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside.

  2. Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.
    • Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Remove the screw located under the plastic tab. Remove the screw located under the plastic tab.
    • Remove the screw located under the plastic tab.

  5. Remove the hard drive by pulling the tab upwards and sliding the hard drive out. Remove the hard drive by pulling the tab upwards and sliding the hard drive out.
    • Remove the hard drive by pulling the tab upwards and sliding the hard drive out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

4 weitere Nutzer haben diese Anleitung absolviert.

Jerry Wakai

Mitglied seit: 31.01.2013

335 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 7-7, Maness Winter 2013 Mitglied von Cal Poly, Team 7-7, Maness Winter 2013

CPSU-MANESS-W13S7G7

5 Mitglieder

6 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 4

Letzte 30 Tage: 23

Insgesamt: 2,725