Einleitung
Replacing the keyboard is an intermediate level repair. Following the instructions carefully will help you successfully replace your keyboard.
Was du brauchst
-
-
Locate the battery locks on the bottom of the laptop.
-
Slide the right lock outwards, until it locks into place.
-
Slide and hold the left lock outwards and hold it in place.
-
-
-
Using a #1 Phillips screwdriver, remove the 5.8 mm screw in the battery slot.
-
-
-
-
Unscrew the four 3.7 mm screws at the top of the keyboard using a #1 Phillips screwdriver.
-
-
-
Using a plastic opening tool, flip the ZIF connector up to release the ribbon and the keyboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
5 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Cal Poly, Team 7-7, Maness Winter 2013 Mitglied von Cal Poly, Team 7-7, Maness Winter 2013
CPSU-MANESS-W13S7G7
5 Mitglieder
6 Anleitungen geschrieben
2 Kommentare
Nice little guide. The only thing I can really think to add would be on the last part for those of us who are super-paranoid about breaking something. If you could add a picture of what the ZIF connector looks like after it's opened would help some.
I appreciate the guide, thanks. :)
Ditto on all of it. I think I broke my ZIF connector !! Help!! 😔
