1. Unscrew the three screws from the back panel with Phillips #0 screwdriver.
    • Unscrew the three screws from the back panel with Phillips #0 screwdriver.

    • Remove the back panel.

  2. Locate the two clips holding the RAM chip in place.
    • Locate the two clips holding the RAM chip in place.

    • Apply pressure to each clip, pulling them away from the RAM.

    • One end of the RAM will pop out.

    • Gently pull RAM out as shown.

    • To intall a new stick of RAM, carefully insert it into into the RAM slot.

    • Gently push down on the RAM chip until it snaps securely into place.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Michael Jensen

Mitglied seit 18.04.2011

417 Reputation

6 Anleitungen geschrieben

Team

Cal Poly, Team 4-3, Regan Spring 2011 Mitglied von Cal Poly, Team 4-3, Regan Spring 2011

CPSU-REGAN-S11S4G3

5 Mitglieder

6 Anleitungen geschrieben

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 3

Insgesamt: 2,553