Einleitung

This guide will show you how to replace your keyboard.

Ersatzteile

Kein Ersatzteil erforderlich.

Carefully pry off the panel above the keyboard from the both sides of the laptop using a flat edge tool. Push back the screen until it is horizontal with the laptop. Gently remove the clips that hold the panel onto the screen hinges.
  • Carefully pry off the panel above the keyboard from the both sides of the laptop using a flat edge tool.

  • Push back the screen until it is horizontal with the laptop.

  • Gently remove the clips that hold the panel onto the screen hinges.

Kommentar hinzufügen

Remove the two screws on the upper outer edges of the keyboard with a #1 Phillips head screwdriver. Gently pry the keyboard from the laptop on the upper outer edges using the flat edge tool. Slowly lift the keyboard away from the laptop until you are able to remove the ribbon that connects the keyboard to the laptop.
  • Remove the two screws on the upper outer edges of the keyboard with a #1 Phillips head screwdriver.

  • Gently pry the keyboard from the laptop on the upper outer edges using the flat edge tool.

  • Slowly lift the keyboard away from the laptop until you are able to remove the ribbon that connects the keyboard to the laptop.

  • CAUTION!! Make sure you remove the keyboard slowly to avoid damaging the ribbon cable.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

5 weitere Nutzer haben diese Anleitung absolviert.

Aryn Pauly

Mitglied seit 29.04.2010

1 Reputation

2 Anleitungen geschrieben

Team

Cal Poly, Team 10-42, Garner Spring 2010 Mitglied von Cal Poly, Team 10-42, Garner Spring 2010

CPSU-GARNER-S10S10G42

5 Mitglieder

10 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 10

Insgesamt: 8,051