Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This guide will illustrate how to replace your optical drive.
Was du brauchst
-
-
Remove the ODD screw with a #1 Phillips head screwdriver as indicated in the picture.
-
Using a flat edge tool, pry it the drive out of it slot from the side of the casing. You can then use your hands to continue pulling the rest the way out of its slot.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team 10-42, Garner Spring 2010 Mitglied von Cal Poly, Team 10-42, Garner Spring 2010
CPSU-GARNER-S10S10G42
5 Mitglieder
10 Anleitungen geschrieben
