Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
The battery is the main source of the device. Be sure to unplug the device from any power source before attempting to remove the battery.
Was du brauchst
-
-
Turn over the laptop and proceed to take out the seven 5mm silver JIS #1 head screws. If some of the screws are difficult to take out use the tweezers to help.
-
-
-
Use the screwdriver to take out the three 5mm black JIS #1 head screws that are located on the hinge.
-
-
-
-
Unscrew the four 5 mm JIS #1 head screws holding the battery to the device and gently remove the battery.
-
-
-
Disconnect the battery from the motherboard by gently pulling out the black connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
USF Tampa, Team S3-G2, Cannon Fall 2017 Mitglied von USF Tampa, Team S3-G2, Cannon Fall 2017
USFT-CANNON-F17S3G2
4 Mitglieder
7 Anleitungen geschrieben
