Einleitung
Be careful to handle this device with care while performing this guide make sure to use use an anti-static wrist strap.
Was du brauchst
-
-
Turn over the laptop and proceed to take out the seven 5mm silver JIS #1 head screws. If some of the screws are difficult to take out use the tweezers to help.
-
-
-
Use the screwdriver to take out the three 5mm black JIS #1 head screws that are located on the hinge.
-
-
-
-
Remove the hard drive from the device by gently pulling on the blue plastic hard drive cover.
-
-
-
Disconnect the hard drive from the mother board by gently pulling out the black connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team S3-G2, Cannon Fall 2017 Mitglied von USF Tampa, Team S3-G2, Cannon Fall 2017
USFT-CANNON-F17S3G2
4 Mitglieder
7 Anleitungen geschrieben
