Einleitung

The RAM card is the part of the computer that has memory and stores the data being used by the computer. It keeps the computer's functions regulating smoothly. Below are a few steps to take in order to remove and replace the computer's RAM Cards.

Ersatzteile

Kein Ersatzteil erforderlich.

Push the locking tabs away from each other.
  • Push the locking tabs away from each other.

Kommentar hinzufügen

Pull up on the battery to remove.
  • Pull up on the battery to remove.

Kommentar hinzufügen

  • Remove the 3mm Phillips #0 screw from the cover.

Kommentar hinzufügen

  • Use a plastic opening tool to lift up the cover and remove by hand.

Kommentar hinzufügen

  • Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module.


    • When released, the RAM module will pop up at a slight angle.

  • 
Lift the RAM module to an angle of about 30 degrees and slide it out.

Kommentar hinzufügen

Abschluss

To reassemble your device, follow these instructions in reverse order.

Benson Smith

Mitglied seit 25.01.2018

327 Reputation

3 Anleitungen geschrieben

Team

USF Tampa, Team S20-G3, Passmore Spring 2018 Mitglied von USF Tampa, Team S20-G3, Passmore Spring 2018

USFT-PASSMORE-S18S20G3

4 Mitglieder

7 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 50