Einleitung

If you find that your laptop is sluggish when many programs are running, freezing, or randomly restarting. It may be time to add more RAM or replace the RAM currently in the laptop.

  1. Unscrew the single Phillips #0 screw from the RAM panel.
    • Unscrew the single Phillips #0 screw from the RAM panel.

  2. Remove the panel.
    • Remove the panel.

  3. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  4. Spread the clips away from the RAM module. When released, the RAM module will pop up at a slight angle.
    • Spread the clips away from the RAM module.

    • When released, the RAM module will pop up at a slight angle.

  5. Lift the RAM module to an angle of about 30 degrees and slide it out. Lift the RAM module to an angle of about 30 degrees and slide it out.
    • Lift the RAM module to an angle of about 30 degrees and slide it out.

Abschluss

To reassemble your device, follow these instructions in reverse order.

When installing the new RAM, push the RAM sticks in at an angle. Proceed to push each RAM stick down until the latches click, indicating that it is locked in.

Ein weiterer Nutzer hat diese Anleitung absolviert.

William Mazanec

Mitglied seit: 29.01.2018

1.236 Reputation

8 Anleitungen geschrieben

Team

USF Tampa, Team S5-G6, Passmore Spring 2018 Mitglied von USF Tampa, Team S5-G6, Passmore Spring 2018

USFT-PASSMORE-S18S5G6

3 Mitglieder

8 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 5

Insgesamt: 98