Toshiba TDP-XP2 Bulb Replacement

Einleitung

The bulb of a projector is only rated for a certain amount of hours, so when it reaches the end of its life the image will become fuzzy and eventually die out. This guide will show how to replace the bulb on this projector.

Was du brauchst

Schritt 1 Bulb

Toshiba TDP-XP2 Bulb Replacement, Bulb: Schritt 1, Bild 1 von 2

Toshiba TDP-XP2 Bulb Replacement, Bulb: Schritt 1, Bild 2 von 2

Remove the two screws from the bottom plate as shown.

Übersetzen

Schritt 2

Remove the two screws on the bulb housing.

Übersetzen

Schritt 3

Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.
Replace the bulb with an equivalent one.

Übersetzen

OMG, is that entire thing the bulb? Or does the bulb get inserted into this piece? It says “replace” as if it it were merely a matter of pushing it in, but I see screws…

lkmemphis - 1. Mai 2018 Antwort