Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
Replacing a towel bar needs a guide because sometimes you can find yourself wanting to renovate your bathroom, replace an old rusty towel bar or have a loose towel bar. Instead of hiring someone to perform this very simple task and adding to your expense of home renovations, you can perform this task on your own. Now with this guide anyone with no knowledge of this task can do it themselves.
Was du brauchst
-
-
Measure the length of your current towel bar to make sure that your replacement towel bar is the correct size and will fit onto the same wall brackets.
-
-
-
In most cases, you can remove the towel bar by removing the screws underneath the bar holders.
-
-
-
-
Place the new towel bar on top of the wall brackets and make sure that the bar is level.
-
-
-
After inserting the screws, screw in both sides firmly. Your new towel holder should now be good to use.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.