Zum Hauptinhalt wechseln

Toy Lightsaber Battery Replacement

Was du brauchst

  1. Toy Lightsaber Battery Replacement, Battery: Schritt 1, Bild 1 von 3 Toy Lightsaber Battery Replacement, Battery: Schritt 1, Bild 2 von 3 Toy Lightsaber Battery Replacement, Battery: Schritt 1, Bild 3 von 3
    • Remove the Lightsaber blade by carefully twisting it off the hilt.

    • Be gentle during this process to avoid damaging the blade or the hilt.

  2. Toy Lightsaber Battery Replacement: Schritt 2, Bild 1 von 3 Toy Lightsaber Battery Replacement: Schritt 2, Bild 2 von 3 Toy Lightsaber Battery Replacement: Schritt 2, Bild 3 von 3
    • Use a Phillips #2 screwdriver to remove the 3.5 mm screws on the hilt.

  3. Toy Lightsaber Battery Replacement: Schritt 3, Bild 1 von 3 Toy Lightsaber Battery Replacement: Schritt 3, Bild 2 von 3 Toy Lightsaber Battery Replacement: Schritt 3, Bild 3 von 3
    • Remove the old C batteries.

    • If the batteries were leaking, be sure you thoroughly clean the inside of the hilt with a pair of tweezers to scrape off the battery acid and wipe away any acid that remains with a tissue or napkin.

    • Battery acid is toxic and dangerous for your health. Wear gloves to protect yourself.

  4. Toy Lightsaber Battery Replacement: Schritt 4, Bild 1 von 3 Toy Lightsaber Battery Replacement: Schritt 4, Bild 2 von 3 Toy Lightsaber Battery Replacement: Schritt 4, Bild 3 von 3
    • Place the new C batteries inside the newly cleaned hilt.

  5. Toy Lightsaber Battery Replacement: Schritt 5, Bild 1 von 3 Toy Lightsaber Battery Replacement: Schritt 5, Bild 2 von 3 Toy Lightsaber Battery Replacement: Schritt 5, Bild 3 von 3
    • Use your Philips #2 screwdriver to screw the 3.5 mm screws back into the hilt.

  6. Toy Lightsaber Battery Replacement: Schritt 6, Bild 1 von 3 Toy Lightsaber Battery Replacement: Schritt 6, Bild 2 von 3 Toy Lightsaber Battery Replacement: Schritt 6, Bild 3 von 3
    • Lastly, twist the Lightsaber blade back on top of the hilt.

    • Press the red button on the hilt to test if the blade glows.

    • If the blade doesn't glow, start over and try again with different C batteries.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.

Zachary Adaes

Mitglied seit: 03/22/21

133 Reputation

1 Anleitung geschrieben

Team

UMass Dartmouth, Team S3-G1, Saloman Spring 2021 Mitglied von UMass Dartmouth, Team S3-G1, Saloman Spring 2021

UMASSD-SALOMAN-S21S3G1

1 Mitglied

1 Anleitung geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 2

Letzte 7 Tage: 12

Letzte 30 Tage: 67

Insgesamt: 3,489