Diese Version enthält möglicherweise inkorrekte Änderungen. Wechsle zur letzten geprüften Version.
Was du brauchst
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Stand facing your bike and locate the brake calipers.
-
To lessen the tension on the brake wire, place one hand on each caliper and push them closer together.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Unhook the brake wire in the metal tube from the brake wire holder on the brake caliper in your left hand.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Find the quick release lever located on the bikes fork to loosen the wheel from the frame.
-
Lift the lever from lock position 180 degrees until the open sign on the lever faces outward. Twist the lever while holding the pin on the opposite side of the wheel.
-
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Pull the frame of the bike upwards to separate the front wheel.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
To deflate the tire, remove the cap and attach the pump head to the valve. You should then hear air flowing out from the tire.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Push the valve upward through the hole in the rim.
-
-
Dieser Schritt ist noch nicht übersetzt. Hilf mit, ihn zu übersetzen!
-
Pull the tire away from the rim until you can insert your fingers under the tire coping to remove it from the inside of the rim.
-
Slide your fingers (still under the tire coping) around the circumference of the tire until you completely remove the tire from the rim.
-