Zum Hauptinhalt wechseln

Trek 820 Tail Light Mounting Bracket Replacement

Was du brauchst

  1. Trek 820 Tail Light Mounting Bracket Replacement, Tail Light Mounting Bracket: Schritt 1, Bild 1 von 1
    • Obtain one tail light mounting bracket and one screw as shown in the picture.

    • The screw should be removed from the mounting bracket.

  2. Trek 820 Tail Light Mounting Bracket Replacement: Schritt 2, Bild 1 von 1
    • Clean the bicycle seat post and mounting bracket.

    • Wrap the mounting bracket strap around the seat post.

    • Verify the larger piece rests towards the tail end aligned with the tires.

    • Verify the bracket's screw hole is on the right side of the bicycle.

  3. Trek 820 Tail Light Mounting Bracket Replacement: Schritt 3, Bild 1 von 2 Trek 820 Tail Light Mounting Bracket Replacement: Schritt 3, Bild 2 von 2
    • Locate the slot on the bracket where the strap will be inserted.

    • Insert the strap into the slot.

    • Tighten the strap just enough to keep the bracket in place.

  4. Trek 820 Tail Light Mounting Bracket Replacement: Schritt 4, Bild 1 von 2 Trek 820 Tail Light Mounting Bracket Replacement: Schritt 4, Bild 2 von 2
    • Insert the screw into the bracket screw hole.

    • Tighten the screw with fingers until the mounting bracket rests freely on seat post.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Team

Cal Poly, Team 1-1, Propen Fall 2012 Mitglied von Cal Poly, Team 1-1, Propen Fall 2012

CPSU-PROPEN-F12S1G1

5 Mitglieder

9 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 1,116