Einleitung

Tablet screens often get damaged, this guide will walk a user through the steps of replacing a damaged screen. It is important to be careful about damaging parts, as most pieces are fragile.

Ersatzteile

Kein Ersatzteil erforderlich.

  1. Locate the indentation at the bottom of the device. Locate the indentation at the bottom of the device.
    • Locate the indentation at the bottom of the device.

  2. Pull on the indentation and take off the casing of the device. Pull on the indentation and take off the casing of the device. Pull on the indentation and take off the casing of the device.
    • Pull on the indentation and take off the casing of the device.

  3. Remove the faulty battery and insert a replacement in its slot. Remove the faulty battery and insert a replacement in its slot.
    • Remove the faulty battery and insert a replacement in its slot.

  4. Remove the six 2.4 mm, Phillips #0 screws circled in the image.
    • Remove the six 2.4 mm, Phillips #0 screws circled in the image.

  5. Kostenloser Versand für alle Bestellungen über 100 $ oder mit einem Pro Tech Toolkit!

    Schau dich im Store um
  6. Remove inner casing exposing the motherboard.
    • Remove inner casing exposing the motherboard.

  7. Remove speakers by peeling back yelllow tape. Remove speakers by peeling back yelllow tape.
    • Remove speakers by peeling back yelllow tape.

  8. Remove ribbon cable on top of motherboard.
    • Remove ribbon cable on top of motherboard.

  9. Peeling back yellow tape, remove the 2.5 mm Phillips #0 screws on top of motherboard.
    • Peeling back yellow tape, remove the 2.5 mm Phillips #0 screws on top of motherboard.

  10. Remove the three 2.5 mm Phillips #0 screws attaching screen to main assembly.
    • Remove the three 2.5 mm Phillips #0 screws attaching screen to main assembly.

  11. Verify that all screws are detached from screen.
    • Verify that all screws are detached from screen.

  12. Detach screen from main assembly.
    • Detach screen from main assembly.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Stewart Jenkins

Mitglied seit: 26.03.2018

207 Reputation

1 Anleitung geschrieben

Team

IUPUI, Team S1-G1, Harley Spring 2018 Mitglied von IUPUI, Team S1-G1, Harley Spring 2018

IUPUI-HARLEY-S18S1G1

7 Mitglieder

4 Anleitungen geschrieben

How can I do step 5? Do i need to push on the rectangle slots? It’s not very descriptive.

Nick “Blue” Wong - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 1

Letzte 30 Tage: 3

Insgesamt: 75