Einleitung
Be aware that too much liquid might harm the engine of the product. For opening the product a spanner screwdriver is needed.
Was du brauchst
-
-
-
Remove the eject button by carefully lifting it out.
-
Remove the cable holder using the Phillips screw driver.
-
Remove the screw holding the mode button.
-
Carefully lift out the electrical unit.
-
-
-
Remove the locking rings from the back end of the gears.
-
Lift the gears from encapsulant.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.
2 Kommentare
Thats what I want to know too. I have a Hamilton Beach hand mixer. The gears look the same as the one shown in this article