Einleitung

This guide outlines how to properly remove the air filter on a Troy-Bilt TB675 EC. The guide also explains how to clean the air filter.

Werkzeuge

Ersatzteile

Kein Ersatzteil erforderlich.

Remove the air filter housing by turning the plastic screw counterclockwise with your hand.
  • Remove the air filter housing by turning the plastic screw counterclockwise with your hand.

Kommentar hinzufügen

Remove the air filter that lays beneath the housing you removed in step 1.
  • Remove the air filter that lays beneath the housing you removed in step 1.

  • It is good practice to inspect your air filter for tears or other defects. If defects are found it is best to replace the air filter rather than to clean it.

Kommentar hinzufügen

  • Clean the air filter thoroughly by spraying compressed air through the filter.

  • Be sure to spray the compressed air away from you in order to prevent injury.

Kommentar hinzufügen

  • Wipe all oil and water residue around the air filter casing with a paper towel or rag.

Kommentar hinzufügen

  • Place the air filter and air filter casing back in its original position.

  • Be sure the air filter and housing are lined up correctly.

Kommentar hinzufügen

  • Complete the maintenance by turning the screw clockwise with your hand until it is fully secured.

Kommentar hinzufügen

Ziellinie

Brian Hall

Mitglied seit 10.10.2014

110 Reputation

1 Anleitung geschrieben

Team

USF Tampa, Team 1-10, Donnelly Fall 2014 Mitglied von USF Tampa, Team 1-10, Donnelly Fall 2014

USFT-DONNELLY-F14S1G10

1 Mitglied

1 Anleitungen geschrieben

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 3

Letzte 7 Tage: 13

Letzte 30 Tage: 40

Insgesamt: 1,133