Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
This is a repair guide for battery replacement.
Was du brauchst
-
-
To reach the battery, follow steps 1 through 3 in the Tungsten E Teardown
-
-
-
Begin to pry up the battery. It is fastened to the mother board using two sided tape.
-
-
-
-
Take replacement battery and solder the wires to the board.
-
Take care to match wire colors as before.
-
Use double sided tape to attach battery firmly to board.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
Ein:e weitere:r Nutzer:in hat diese Anleitung absolviert.