Einleitung
This guide walks you through how to replace a broken speaker on your UnBranded Tablet.
Was du brauchst
-
-
Remove the cover over the Micro SD outlet by using a plastic opening tool to pry open and push out the cover panel.
-
-
-
Insert blue guitar picks in the crease between the top and bottom panels starting on the same end as the Micro SD slot.
-
-
-
-
Insert the black spudger between the guitar picks in order to pry open gaps between the blue guitar picks.
-
As the gaps open, slide the guitar picks along the sides to separate the panels.
-
-
-
Pry all four sides apart using the blue guitar picks and the black spudger until they can easily be pried apart by hand.
-
-
-
Reflow the solder of the black and red wires from the circuit board by using the soldering iron.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Team
IUPUI, Team 2-1, Baechle Fall 2015 Mitglied von IUPUI, Team 2-1, Baechle Fall 2015
IUPUI-BAECHLE-F15S2G1
3 Mitglieder
3 Anleitungen geschrieben
