Zum Hauptinhalt wechseln

Uniden UTAB71 Speaker Replacement

Was du brauchst

  1. Uniden UTAB71 Speaker Replacement, Speaker: Schritt 1, Bild 1 von 2 Uniden UTAB71 Speaker Replacement, Speaker: Schritt 1, Bild 2 von 2
    • Use a plastic pry tool to undo the clips that attach the two halves of the tablet.

    • Make sure to be gentle with the pry tool and work your way around the edges of the tablet slowly.

    • Make sure the tablet is powered off before prying open.

    • There are two power ribbons connecting the screen to the back of the tablet. Make sure not to put too much stress on them.

  2. Uniden UTAB71 Speaker Replacement: Schritt 2, Bild 1 von 1
    • Use a soldering tool to disconnect the speaker wires off the motherboard.

    • If you have no experience in soldering, please follow this guide

Abschluss

To reassemble your device, follow these instructions in reverse order.

Ryan Jewell

Mitglied seit: 10/20/16

422 Reputation

4 Anleitungen geschrieben

Team

UMass Dartmouth, Team 5-4, Martin Fall 2016 Mitglied von UMass Dartmouth, Team 5-4, Martin Fall 2016

UMASSD-MARTIN-F16S5G4

3 Mitglieder

8 Anleitungen geschrieben

0 Kommentare

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 11

Insgesamt: 165