Einleitung
What you can expect from this guide is a step by step process on how to remove the plastic case on a Verizon Ellipsis Jetpack MHS800L.
Was du brauchst
-
In diesem Schritt verwendetes Werkzeug:Phillips #00 Screwdriver$5.49
-
With the device on its back and the label facing you, remove the rubber screw cover on the top left corner of the device.
-
Under the rubber circle, remove the 1.25 mm screw using a Phillips #00 Screwdriver.
-
-
-
-
Remove three 1.25 mm screws.
Are steps 3 and 4 reversed? Where are the 3 screws?
Th3 first left corner has a screw but under the cover on the others is just a black circle
Yes steps 3 and 4 are reversed. After removing the single screen (Philips #000 works better than #00), flip the device over and follow step 4 to remove the top black cover. Then follow step 3 to remove the 3 screw shown.
-
-
In diesem Schritt verwendetes Werkzeug:iFixit Opening Picks (Set of 6)$4.99
-
Use a plastic pick at the seams and pry open the case.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.