Einleitung
The hot plate is held in place by multiple screws along the burner ring and electrical wires. When free from the frame, take care when removing the iron plate itself as it is fairly dense.
Was du brauchst
-
-
Remove the screws on the back panel with the #1 Phillips screwdriver bit.
-
The screws in the rubber legs of the burner do not need to be removed.
-
-
-
-
Remove screws #1 Phillips screwdriver bit.
-
3 screws on the perimeter of the circle
-
1 screw in the circle
-
2 screws on the eletrical stands with wires
-
-
-
Remove plate carefully as to not damage internal components i.e. insulator, metal frame, wires, etc.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
2 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
USF Tampa, Team 10-7, Brown Fall 2014 Mitglied von USF Tampa, Team 10-7, Brown Fall 2014
USFT-BROWN-F14S10G7
3 Mitglieder
5 Anleitungen geschrieben
