Zum Hauptinhalt wechseln

Water Damage on main board of Nokia 206 RM873

Was du brauchst

  1. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: Schritt 1, Bild 1 von 3 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: Schritt 1, Bild 2 von 3 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: Schritt 1, Bild 3 von 3
    • Remove back cover & battery.

  2. Water Damage on main board of Nokia 206 RM873: Schritt 2, Bild 1 von 2 Water Damage on main board of Nokia 206 RM873: Schritt 2, Bild 2 von 2
    • Remove the front case by prying it open. You will hear clicks.

    • Be careful with taking off screen if you use a spudger.

  3. Water Damage on main board of Nokia 206 RM873: Schritt 3, Bild 1 von 2 Water Damage on main board of Nokia 206 RM873: Schritt 3, Bild 2 von 2
    In diesem Schritt verwendetes Werkzeug:
    Tweezers
    $4.99
    Kaufen
    • Use a Torx screwdriver to remove the screen screws.

    • Use a spudger or tweezers to remove the connector of the LCD screen.

  4. Water Damage on main board of Nokia 206 RM873: Schritt 4, Bild 1 von 3 Water Damage on main board of Nokia 206 RM873: Schritt 4, Bild 2 von 3 Water Damage on main board of Nokia 206 RM873: Schritt 4, Bild 3 von 3
    • The PCB board had water damage, see this in picture 3.

    • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

  5. Water Damage on main board of Nokia 206 RM873: Schritt 5, Bild 1 von 2 Water Damage on main board of Nokia 206 RM873: Schritt 5, Bild 2 von 2
    • How and where to use the cotton swabs.

Abschluss

To reassemble your device, follow these instructions in reverse order.

17 weitere Nutzer:innen haben diese Anleitung absolviert.

Kevin D

Mitglied seit: 05/02/14

7.316 Reputation

21 Anleitungen geschrieben

4 Kommentare

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - Antwort

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - Antwort

Nokia 206 display and charger pin

Mithilesh Yadav - Antwort

Not working kiy 1.2.3 and colling ricev kiy not working

K .M Jugesh - Antwort

Kommentar hinzufügen

Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 6

Letzte 30 Tage: 25

Insgesamt: 10,836