Diese Anleitung enthält neuere Änderungen. Wechsel zur neuesten unüberprüften Version.
Einleitung
In this guide, you will learn how to remove the outer casing of the Westcott iPoint Evolution pencil sharpener. Use this guide to replace the casing or to access the sharpener's internal components.
Was du brauchst
-
-
Step 1: Have the back of the pencil sharpener facing you so that you can locate the power source.
-
-
-
Step 3: There are three parts of the sharpener. Start off by grabbing the very top of the sharpener and twist it to the right and lift up to remove it
-
-
-
-
Step 5: Remove the small ring that is around the sharpener. (Below the center of the sharpener that you just removed)'
-
-
-
Step 6: Flip the pencil sharpener upside down. Once upside down you will see four screws located at the bottom of the pencil sharpener.
-
-
-
Step 7: Take a screwdriver and begin to unscrew all of the screws on the bottom.
-
-
-
Step 8: After all the screws are removed you will be able to cleanly take off the bottom of the sharpener.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Rückgängig: Ich habe diese Anleitung nicht absolviert.
3 weitere Nutzer:innen haben diese Anleitung absolviert.
Team
Central Coast New Tech High, Team 6-5, Rushing Spring 2016 Mitglied von Central Coast New Tech High, Team 6-5, Rushing Spring 2016
CCNTH-RUSHING-S16S6G5
2 Mitglieder
1 Anleitung geschrieben
