Zum Hauptinhalt wechseln

Einleitung

This guide will demonstrate how to remove and replace the feet on the Wii Balance Board.

Ersatzteile

Keine Ersatzteile angegeben.

  1. Flip device upside-down so the plastic white board is facing the ground.
    • Flip device upside-down so the plastic white board is facing the ground.

    • Locate the four feet in the corners of the Balance Board.

    • Unscrew the three 12.7 mm Phillips screws from each foot cover.

  2. Remove the gray plastic ring from the actual foot by lifting it up.
    • Remove the gray plastic ring from the actual foot by lifting it up.

  3. MacBook Akku Fix Kits

    Ab $69.99

    Buy Now

    MacBook Akku Fix Kits

    Ab $69.99

    Buy Now
  4. Separate the loose foot from the device by lifting it up.
    • Separate the loose foot from the device by lifting it up.

  5. Repeat steps two and three on the remaining four feet.
    • Repeat steps two and three on the remaining four feet.

Abschluss

To reassemble your device, follow these instructions in reverse order.

Cory Olson

Mitglied seit: 29.09.2014

708 Reputation

4 Anleitungen geschrieben

Team

Cal Poly, Team 13-8, Forte Fall 2014 Mitglied von Cal Poly, Team 13-8, Forte Fall 2014

CPSU-FORTE-F14S13G8

5 Mitglieder

5 Anleitungen geschrieben

I am in need of a foot cover. Where can I find one??

Marvin Hopper - Antwort

Kommentar hinzufügen

Statistik anzeigen:

Letzte 24 Stunden: 1

Letzte 7 Tage: 7

Letzte 30 Tage: 20

Insgesamt: 1,030